This is the newest version of the JAE 12G.
Lots of small changes make building even easier.
The JAE outrigger series were designed by IMPBA Hall Of Fame member Rod Geraghty, with David Hall, Ron Zaker Jr. and Martin Truex Jr.
These boats are the current state of the art in leading edge model boat racing.
The JAE boats hold many world speed records.
The JAE design features advances in low hydrodynamic drag such as
anti-capillary and water shearing ride surfaces, causing these hulls to
literally fly just above the water surface.
In fact, when you look at videos and pictures of these boats running fast,
you can see daylight under the boat, even at 139 mph!
Assembly of the 12G4 is straightforward and simple, thanks to our world famous instruction manual.
This kit contains the following:
Complete Laser cut wood for entire hull
Laser cut foam sponson cores
Brass sponson sleeves
Fiberglass boom tube set with mounting hardware
Aluminum turn fin with mounting hardware
Wood servo mounts
Photo illustrated step by step building, setup and running manual
JAE 12G4 Specifications:
Length- 24 inches
Beam- 16 inches
Weight- 2 pounds, race ready
Engine- .12, .15, .18 Air or Water cooled Nitro
Radio- 2 channel
Servos- Hitec HS-225MG and our 5001 servos
You can use ANY 12,15 or 18 (small block) engine! Air cooled OR water cooled!
Pull the engine out of your truggy and bolt it in! With our new mounts, you can put any pull start, zip start, Tiger drive or belt start engine in place.
Glue, Paint, etc
We have an ultimate hardware set that includes everything but engine and radio.
See our 12G Ultimate Hardware Set
We now have a Cowling for this boat.
Note that this kit comes with holes drilled for our engine mounts. If you do not want the holes drilled, please select below-
This product was added to our catalog on Thursday 20 January, 2011.