Electronic Speed Control with FWD/REV for small boats.
Perfect for our Tugster Tug Boat.
Use with brushed motors only. NOT FOR BRUSHLESS.
7.4 volts Maximum.
Use 6 volt gell cells, 6 cell NiCd/NiMh or 2S LiPo.
30 Amp controller can spin the motor so slowly that you can count the revolutions.
Completely variable all the way to full speed.
Supplies 5.6 volts to your receiver so that you don't have to run a separate receiver battery. This power back feeds from the receiver plug.
Has large Tamiya style battery connector, 4mm female motor connectors and the standard "S" type of radio plug.
Fully wired and ready to use.
Has safety reverse delay. You must wait 1 second when going from forward to reverse.
For our Brushless motor, we recommend the HobbyWing 18A
This product was added to our catalog on Monday 07 April, 2014.