High Volume Dual Pickup Rudder Assembly

Classic side entrance rudder with enlarged holes.

The bigger dual water pickups are drilled into the side of the blade.

Provides more volume than "stock" side pickup rudders.

This rudder is guaranteed not to bend or break under normal use.

Tapered blade rudder is compatible with Zipp 3413 rudder assemblies and all Zipp Gas hardware sets.

Inlets are 3mm wide. 

Rudder is about 6-1/4 inches high.

Tapers from 1-1/4 to 1 inch at the bottom.

Choose right or left mounting below. This is which side of the boat the rudder gets mounted to.

Default is right side of boat (steering arm on left of rudder as shown).

Also choose standoff length (from transom) below.

Measured from transom to leading edge of rudder.