All Products

Large "T" fitting for water or fuel Measures about 1-1/2x1 inch Use large or XL tubing up to 5/32 ID Made from clear anodized billet ... See Options

Aluminum "Y" fitting for XL water line or large Tygon fuel line. Can be used to split two water pickups into one, or one into two. Made ... See Options

Aluminum "Y" fitting for large water line or extra large Tygon fuel line. Can be used to split two water pickups into one, or one into two. ... See Options

. 150 diameter flexible shaft with a 3/16 stub shaft welded on. Total length is 17 inches, including the 2-3/8 long stub shaft. Suitable for nitro ... See Options

Extended strut for use on hydros. Works well on sport hydros and outriggers. Accepts 5/16 brass tube into the nose. End of strut is about 2-1/2 ... See Options

Aluminum shaft saver for 1/4 inch shafts. Prevents loss of shaft (and prop) if the shaft spins in the collet. Clamp design will not harm flex ... See Options

Use on gas and big nitro hulls with a 1/4 inch shaft. Excellent for catamarans and crackerboxes (check rules). Primarily used on cats, this can ... See Options

1/4 inch drive dog to fit most gas prop hubs. 7/16 OD with drag reducing front bevel. Made from stainless steel. Includes high quality hardened set ... See Options

Use on gas and big nitro hulls with a 1/4 inch shaft. Primarily used on hydros, this can also be used on a mono hull for surface or submerged drive. ... See Options

Use on gas and big nitro hulls with a 1/4 inch shaft. Primarily used on hydros, this can also be used on a mono hull for surface or submerged drive. ... See Options