JAE Outboard Outrigger Kit
World Record Holder!
All of the JAE series of boats were designed by IMPBA Hall of Fame member Rod Geraghty and David Hall. They were devoloped by Ron Zaker Jr. and Martin Truex Jr.
The JAE series of hulls are the next generation of high performance hydroplanes and hold many world records.
This new JAE 21OB is based on the popular 21G2 inboard.
Designed for any 3.5cc (.21) outboard, the 21OB is by far the easiest outboard hydro to setup and run.
There are no adjustments needed. No engine angle or depth adjustments at all. Just set it and forget it!
The kit is CAD designed and Laser cut from 100% birch plywood.
All necessary parts to build the complete hull are included including:
All Birch Ply
All Laser cut foam
Aluminum Turn Fin with screws
Carbon Fiber Boom Tubes
Aluminum Boom Tube Sleeves
5/16 Boom Tube Collars (4)
Photo Illustrated 36 Page Manual
The kit is easy to build thanks to our industry leading spiral bound instruction/setup manual.
All steps are clearly described and illustrated.
Required to complete:
for Nitro Version
3.5cc Nitro outboard engine
2-3 channel radio w/ one high torque std. size servo
6-8 ounce fuel tank and lines
Steering and throttle pushrods
for Electric Version
3.5cc outboard Lower Unit
2 channel radio w/ one high torque std. size servo
150 Amp ESC
4S 5000 mah LiPo Battery
40-42mm 3 blade prop
Note that the electric version has solid carbon booms.
Choose Nitro or Electric version below:
We have a complete hardware set available with every possible thing you need to complete your Nitro 21OB except transmitter, receiver and steering servo.
See our 3609-U 21OB Ultimate Hardware Set
SAW (Straight AWay) Record runs below