Bullet Prop Tail Nut


Bullet prop tail nut for 1/4 inch shafts.

Not actually a nut, but has a 1/4 inch hole with a set screw.

Hole depth is a little over 1/2 inch.

Bullet is about an inch long and about 1/2 inch diameter.

Made from stainless steel.

Not recommended to hold the prop in place unless you file a flat spot under the set screw.
Even then, putting this behind a lock nut would be better.

Includes a bullet nut and set screw.

Add to Cart:

  • Model: 3615
  • Shipping Weight: 0.2lbs
  • In Stock

This product was added to our catalog on Wednesday 23 August, 2017.

Copyright © 2023 Zippkits. Powered by Zen Cart