Lightweight Carbon Pushrod Set
Length can be from 6 to 34 inches total
Great for Thunderboats or other long boats
5/16 Diameter by 19.75 length Carbon tube
2x Aluminum ferrules
2x 4-40 pushrods
2x 4-40 ball link with screws
2x Heat shrink tube
Cut carbon to length if needed.
Epoxy ferrules into ends of tube.
Add heat shrink to ends (helps prevent splitting).
Insert 4-40 rods and adjust length.
Tighten set screws. That's it!
Note: Do not use any thread lock on the set screws. Doing so will make them permanent.
We also offer a longer length, with 36 inch carbon tubes.
This product was added to our catalog on Monday 26 June, 2023.