This is the all new Tugster Tug Boat Kit!
Based on the popular "Springer" class tug boat models, this boat is almost too much fun!
Use this boat for fun, use it as a retreival boat or use it in competition.
With the included Push Knee kit, the Tugster is a water soccer animal!
Imagine a group of your friends pushing a mini soccer ball around a pond or large pool. The "goal" is to put the ball between the goal posts. Maybe there is a "goalie" watching the area.
Imagine the laughs and the looks of concentration on everyone's face! Priceless!
We make these kits out of wood that has small knots or plugs in it.
This wood is cosmetically unsuitable for our larger models, but perfectly suited for this kit.
Using this wood allows us to sell these kits at a really low price.
We supply premium grade 1/16 Aircraft plywood for the hull bottom.
The finished boat has the following specs-
Length- 18 Inches
Beam- 8 Inches
Weight- 6-8 Pounds (with ballast)
Motor- 550 Brushed or Brushless
Battery- 2X 6V SLA or Gel Cell (or 5000Mah 2S Lipo Car Pack)
ESC- Any FWD/REV
Prop- 40-44mm 3 blade
All Laser cut 1/8 and 1/16 Birch Plywood
Dowel Smoke Stack
Easy Tab and slot construction
Indiana Wheel House
Photo Illustrated Step by Step Instructions
Required to complete-
Running Hardware (zipp 505)
2 Channel Radio
1 Standard Servo (Zipp 5003)
ESC with FWD/REV (633)
2x 6V 4.5A SLA Batteries (Zipp 701)
Battery Harness (626)
BB's, Lead Weight, etc for Ballast
Everything to complete your Tugster (less materials and transmitter/receiver)
are available in our Ultimate Hardware Set
Current Reviews: 3
This product was added to our catalog on Monday 28 October, 2013.