Strut Bushing- 1/4 Inch

1 pair of lead Teflon bushings to fit our 3416 and 3421 struts with a 1/4 inch shaft.

When pressing the old bushings out, it may be easier to drill them out as much as possible before pressing them. You can do this without heat.

Note that you must press the rear bushing out to the rear, and the front out to the front. You cannot press both bushings the same direction, as there is a step between them.

You must heat the strut to press in the new ones. Be very careful not to overheat the strut.