New 21FE v2 Fast Electric Outrigger Kit (33FE)
New, updated version of our popular JAE 21FE.
Same sponsons, but the tub is longer and the rear ski has been improved.
We also made the kit easier to build, and included more hardware.
The 21FE is the Fast Electric version of our world record holding JAE 21GT nitro outrigger kit.
The JAE 21 holds numerous oval and straightaway records.
Designed by IMPBA Hall Of Fame member Rod Geraghty.
This hull is the current state of the art for riggers, and currently holds the record for the fastest ever 2 laps on a 1/4 mile course.
Designed for very low hydrodynamic drag with water shearing and anti capillary features, this hull is fast, and turns are incredible!
This version was optimized for heat racing by Martin Truex, Jr.
This is considered a full kit, as it includes carbon boom tubes, aluminum boom tube sleeves, boom tube collars, cowling and aluminum turn fin with mounting hardware.
This kit is highly pre-fabricated, and assembly is easy, thanks to the 33 page photo illustrated, step by step assembly manual.
Designed for 4S operation to 6000+ mah, the 33FE will accept smaller (4000 mah) 6S setups as well.
We made the center section big enough for any motor and ESC you want.
Want to run a 3674? No problem. 4082? Bring it.
JAE 21FE v2 Specifications:
Length- 33 inches
Beam- 20-3/4 inches
Weight- 5.0 to 7.5 pounds
Motor- Any 36-40mm inrunner
Radio- 2-3 channel
Full Kit Includes:
Laser cut Birch plywood for the entire kit
CNC machined high density foam sponson cores
.093 Aluminum turn fin with mounting hardware
.125 6061 Aluminum Motor Mount
Anodized aluminum sponson sleeves (4)
Carbon Fiber Solid boom tubes (2)
Aluminum boom tube collars (4)
Brass tub inserts for boom tubes (2)
Vacuum formed PETG Bubble Cowling
33 Page Photo Illustrated Building and Setup Manual
Our 21FE v2 Ultimate Hardware Set includes everything you need, except motor, ESC, radio and building/ finishing materials.
We recommend our aluminum servo mount for this kit (included with the Ultimate Hardware Set).
We also have a pre-bent shaft tube for the 21FE v2 (included with the Ultimate Hardware Set).
The 21FE v2 can use a wide range of motors, speed controls and batteries.
Here is one example of what we like for 4S operation.
This would qualify for P Limited in most areas:
We really like the SSS 3656/2030kv 6 pole.
Great on 4S, and can be used on 6S as well!
The best value for us is the Flycolor 150.
Look for true 60c or higher.
You can spot imposters by the wire size. If the battery says "130C" and it has 14 gauge wires, look elsewhere.
Good batteries have 10 or 8 gauge wires.
For 4S operation, the efficiency of this boat allows you to use a lot of prop.
If you use quality components, you can use our 4816 prop for great performance.
Also look at the ABC 1916-17-45 and 1817-17-45.
This product was added to our catalog on Thursday 09 February, 2017.