Carbon Pushrod Set- Single

Lightweight Carbon Pushrod Set

Length can be from 6 to 34 inches total

Fully adjustable
Great for Thunderboats or other long boats

Includes:
5/16 Diameter by 19.75 length Carbon tube
2x Aluminum ferrules
2x 4-40 pushrods
2x 4-40 ball link with screws
2x Heat shrink tube

To use:

Cut carbon to length if needed.
Epoxy ferrules into ends of tube.
Add heat shrink to ends (helps prevent splitting).
Insert 4-40 rods and adjust length.
Tighten set screws. That's it!

Note: Do not use any thread lock on the set screws. Doing so will make them permanent.

We also offer a longer length, with 36 inch carbon tubes.
Choose below: