Carb Water Shield- Super Sport

This shield prevents water from shutting down the engine when racing in tight quarters. Race tested!

The shield fits against the deck bottom.
The nut gets glued to the bottom of the shield, after you drill a 1/4 inch hole thru the deck and shield.

Use a 1/4-20 nylon bolt to mount.

Design allows you to choke the carb while in place.

2 files. Shield and nut.

Free download. After confirmation, you will see a link to download.
You can also go to "my account" and download them.

Print in PLA or PETG
100% infill
0.15 layer height
10% support