JMP Hobby Group LLC
Categories
Aircraft and AccessoriesNitro Boat KitsGas Boat KitsFast Electric Boat KitsTug Boat Kits and AccessoriesGlue and EpoxyEnginesDecalsBatteries and ChargersElectric MotorsSpeed ControlsElectric AccessoriesRudders & StrutsCables & ShaftsOutboard AccessoriesDrive Dogs & Prop NutsNitro Engine AccessoriesGas Engine AccessoriesNitro ExhaustGas ExhaustPropellers->Fuel System- GasolineFuel System- NitroWater CoolingTrim Tabs & Turn FinsRadio AccessoriesCustom Radio Box KitsServosHull AccessoriesToolsReplacement PartsHardware Sets->Gift CertificatesCowlingsClearance/ Scratch & DentApparel3D Print FilesNot Eligible for Free ShippingAll Products ...
Important Links
Featured
Super Sport Gas Mono
$89.00
Left Mono Turn Fin- Sharpened
$12.00 $6.00Save: 50% off
All Products
Displaying 100 to 198 (of 528 Products)
| Product Image | Product Name | Model | Price |
|---|---|---|---|
 |
40mm Cooling RingAluminum cooling jacket for 40mm motors. Fits 4082 motors. Length is 55mm. Machined from... |
711 | $12.00 |
 |
40mm Cooling RingAluminum cooling jacket for 40mm motors. Fits 4092 and 40104 motors. Length is 70mm. Machined... |
710 | $12.00 ... See Options |
 |
4214 2 Blade Copper Prop4214/2 Prop Good for .21 nitro, 4 or 6 cell inboard or outboard Diameter 42mm... |
4017 | $12.00 |
 |
4214 3 Blade CNC Prop4214/3 CNC Machined 7075-T6 aluminum prop Great prop on 4S mono, cat and hydro Diameter 42mm... |
4004 | $22.00 |
 |
4216 3 Blade CNC Prop4216/3 CNC Machined 7075-T6 aluminum prop Great prop on 4S mono, cat and hydro. Use caution with... |
4043 | $24.00 |
 |
4216 CNC 2 Blade5 axis CNC machined aluminum prop. 42mm (1.65 in.) Diameter 67.2mm (2.64 in.) Pitch Good for .21... |
4037 | $19.00 |
 |
4216R CNC 2 Blade- Reversed5 axis CNC machined aluminum prop. Reversed (RH rotation) for twins. 42mm (1.65 in.) Diameter... |
4038 | $19.00 |
 |
4218/ CNC 3 Blade5 axis CNC machined aluminum 3 blade prop. 42mm (1.65 in.) Diameter 75mm (2.97 in.) Pitch Big prop... |
4040 | $22.00 |
 |
4219 2 Blade Copper Prop4219/2 Prop Good for strong .21 nitro, 4 cell inboard or outboard Great... |
4014 | $12.00 |
 |
4219 CNC 2 Blade5 axis CNC machined aluminum prop. 42mm (1.65 in.) Diameter 77mm (3.14 in.) Pitch 4S to 6S... |
4030 | $19.00 |
 |
432 Copper Prop (32x45)432 prop made from copper alloy. Performance upgrade from the plastic prop. 32mm (1.26 inch)... |
4027 | $9.00 |
 |
437/3 PropCopper 437 3 blade prop. Ready to use out of the package. You can sharpen it a little more than... |
4019 | $12.00 |
 |
438 Prop438/2 Prop 38mm diameter (1.49 inches) 53mm pitch (2.08 inches) Suitable for nitro boats from .10... |
4009 | $12.00 |
 |
438/3 PropCopper 438 3 blade prop. Ready to use out of the package. You can sharpen it a little more than it... |
4028 | $12.00 |
 |
440 Prop40mm diameter (1.57 inches) 56mm pitch (2.20 inches) Suitable for nitro boats from .12 to .21 and... |
4007 | $12.00 |
 |
4414/3 CNC PropCNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. 44mm Diameter 62mm... |
4048 | $19.00 |
 |
4416 CNC PropCNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. 44mm Diameter 70mm... |
4046 | $19.00 |
 |
443 Prop44mm diameter (1.73 inches) 62mm pitch (2.44 inches). Suitable for nitro boats from .18 to .28 and... |
4010 | $12.00 |
 |
448 Copper PropCopper 448 2 blade prop. Ready to use out of the package. You can sharpen it a little... |
4021 | $16.00 |
 |
45 Twin Engine Mount Set- JAEThese billet T-6 aluminum mounts fit our JAE 45 Twin Outrigger. They feature HD rubber grommet... |
3464 | $48.00 ... See Options |
 |
45/67 Mono RudderWater pickup rudder for .45 to .67 mono or deep vee boats. New straight blade (no taper) LE of... |
3557 | $26.00 $19.00Save: 27% off |
 |
45/90 Hydro RudderWater pickup rudder for .45 to .90 boats. New straight rudder (no taper). LE of rudder is 2-1/4... |
3425 | $30.00 |
 |
450 Copper PropCopper 450 2 blade prop. Ready to use out of the package. You can sharpen it a little... |
4022 | $16.00 |
 |
4514 CNC PropCNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. 45mm Diameter 63mm... |
4042 | $19.00 |
 |
4516 CNC 2 Blade5 axis CNC machined aluminum prop. 45mm (1.77 in.) Diameter 72mm (2.83 in.) Pitch Good for 4S or... |
4039 | $19.00 |
 |
4518 CNC 3 Blade5 axis CNC machined aluminum prop. 45mm (1.77 in.) Diameter 81mm (3.18 in.) Pitch Big prop, lots of... |
4006 | $24.00 |
 |
4519 2 Blade Copper Prop4519/2 Prop Good for very strong .21 nitro SAW, 4 and 6 cell inboard or... |
4020 | $16.00 |
 |
4519 CNC 2 Blade5 axis CNC machined aluminum prop. 45mm (1.77 in.) Diameter 85mm (3.36 in.) Pitch Good for 4S hydro... |
4026 | $19.00 |
 |
452 Copper PropCopper 452 2 blade prop. Ready to use out of the package. You can sharpen it a little... |
4023 | $18.00 |
 |
45GT Cowling- BlemishedCosmetic damage in gel coat. Wash cowling with Dawn to remove all mold release. Fill damaged areas... |
0008 | $26.00 ... See Options |
 |
45GT Outrigger Hydro Short KitThis is the new 45GT short kit. New, Martin Truex designed longer tub and different sponsons... |
6506 | $99.00 |
 |
4614 3 Blade CNC Prop7075 Aluminum 46mm 3 blade prop. Ready to use out of the package. Perfectly sharp and... |
4032 | $20.00 |
 |
463 2 Blade PropCast aluminum 463 2 blade prop. Great prop for weed trimmer powered hulls. Diameter 2.48... |
4110 | $14.00 |
 |
472/3 Prop472/3 Copper Alloy Prop. Good for large gas mono hulls. 72mm Diameter (2.83 inches) with 101mm... |
4029 | $24.00 |
|
4814 3 Blade CNC Prop7075 Aluminum 48mm 3 blade prop. Ready to use out of the package. Perfectly sharp and... |
4050 | $20.00 |
 |
4816 2 Blade CNC Prop7075 Aluminum 48mm 2 blade prop. Ready to use out of the package. Sharp and balanced. 48mm... |
4052 | $19.00 |
 |
4818 3 Blade CNC Prop7075 Aluminum 48mm 3 blade prop. Ready to use out of the package. Sharp and balanced. 48mm... |
4053 | $20.00 |
 |
4S Power Combo4S power set for 29-36 inch boats Perfect for our JAE 21FE V2 or R4 outrigger on 4S Includes: ... |
800 | $150.00 $134.00Save: 11% off |
 |
4X4.5 2 Blade Prop- GymJet4x4.5 prop for our GymJets! 4 inch diameter 4.5 inch pitch 2 blade Includes 1 plastic... |
610 | $1.00 $0.50Save: 50% off ... See Options |
 |
5 Minute Epoxy 4.5 oz5 minute epoxy in two bottles total 4.5 ounces. Mix 1 to 1 Working time- 3 minutes Cure- 10... |
201 | $11.20 |
 |
5-40 Lock Nut5-40 locking prop nuts. Fits 1/8 inch shafts. Includes 1 pair. |
3499 | $1.75 |
 |
5/16x18 Brass Shaft Tube for 1/4 Shaft5/16 OD Brass shaft tube for 1/4 shafts. .015 wall thickness. For use without any kind of... |
3568 | $4.00 |
|
5/16x36 Brass Shaft Tube for 1/4 Shaft5/16 OD Brass shaft tube for 1/4 shafts. .015 wall thickness. For use without any kind of... |
3452 | $9.00 |
 |
5014 3 Blade CNC Prop7075 Aluminum 50mm 3 blade prop. Ready to use out of the package. Perfectly sharp and... |
4041 | $20.00 |
 |
5018 CNC 3 Blade5 axis CNC machined aluminum prop. 50mm (1.97 in.) Diameter 90mm (3.54 in.) Pitch Big prop, lots of... |
4112 | $24.00 |
 |
5214 2 Blade CNC Prop7075 Aluminum 52mm 2 blade prop. Ready to use out of the package. Perfectly sharp and... |
4044 | $20.00 |
 |
5514 2 Blade CNC Prop7075 Aluminum 55mm 2 blade prop. Ready to use out of the package. Perfectly sharp and... |
4045 | $22.00 |
|
5514 3 Blade CNC Prop7075 Aluminum 55mm 3 blade prop. Ready to use out of the package. Perfectly sharp and... |
4047 | $24.00 |
 |
570 2 Blade PropCast aluminum 570 2 blade prop. Great prop for stock or mod gas mono hulls. Diameter 2.75 inches... |
4000 | $16.00 |
 |
5mm Collet for .150 ShaftCollet fits 5mm smooth motor shaft. Clamps to .150 flex shaft. ID is .150 (not 4mm) to... |
3492 | $8.00 |
 |
5mm Collet for .187 ShaftCollet fits 5mm motor shaft. Clamps to .187 flex shaft. Stainless steel |
3512 | $9.00 |
 |
5x3 2 Blade Prop5x3 prop. Works well on our ULS aircraft series (Cherokee, Bonanza, P-51, AT-6). 5 inch... |
615 | $1.00 $0.50Save: 50% off |
 |
6 inch Servo Extension6 inch (15cm) servo extension Fits all modern servos and speed controls 26 ga wire Includes... |
3630 | $1.50 |
 |
6 Ounce Nitro Fuel TankSullivan 6 ounce flex fuel tank for nitro fuel only. Includes flex tank, stopper, cap, screw,... |
3523 | $9.00 |
 |
6219/3 Super PropNew Super Prop! Now polished! New Hard Copper alloy construction. Amazing performance on Gas... |
4111 | $59.00 $49.00Save: 17% off ... See Options |
 |
670 Copper Prop70mm diameter (2.75 inches) 112mm pitch (4.41inches) Suitable for gas boats and large electric.... |
4016 | $24.00 |
 |
6717/3 prop67mm diameter (2.63 inches) 114mm pitch (4.49 inches) Suitable for gas boats and large electric. ... |
4003 | $26.00 ... See Options |
 |
6V Automatic Battery ChargerNow Available! Fully automatic battery charger for 6V Gel Cell or Sealed Lead Acid Batteries. ... |
506 | $19.00 |
 |
6V SLA BatteryNew 6V 4.5A Sealed Lead Acid Battery. Use 2 of these in parallel for your Tugster Tug Boat. Can... |
701 | $19.00 $12.50Save: 34% off |
 |
7016/3 Prop70mm diameter (2.75 inches) 112mm pitch (4.40 inches) Suitable for gas boats and large electric. ... |
4001 | $28.00 ... See Options |
 |
7814/2 Copper Prop78mm diameter (3.07 inches) 109mm pitch (4.29 inches) Suitable for gas boats and large electric. ... |
4002 | $24.00 |
 |
8 Inch Square8 inch metal square Great for building and setup Measures about 8x4 inches Aluminum and steel... |
3709 | $8.00 ... See Options |
 |
8 Ounce Nitro Fuel TankSullivan 8 ounce Flex fuel tank for nitro fuel only. Includes tank, stopper, cap, screw, brass... |
3467 | $9.25 |
 |
8mm Collet for .187 ShaftNew Fast Electric Collet Collet fits 8mm electric motor shaft. Clamps to .187 (3/16) flex... |
3535 | $12.00 |
 |
8mm Collet for .250 ShaftNew Fast Electric version of our famous Super Collet! Collet fits 8mm electric motor shaft. ... |
3561 | $12.00 ... See Options |
 |
8x3.8 Slow Fly Prop 8x3.8 slow fly prop. Stiff plastic. Works well on our 2D/3D motor set. Includes 1 prop... |
617 | $1.00 $0.50Save: 50% off |
 |
90 Amp Flycolor ESC90 Amp ESC for boats. Works great in our JAE 26FE! With Built-in switching BEC, and lower power... |
704 | $59.00 $42.00Save: 29% off |
 |
90 Degree 7/8 Header Short Offset90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 1 inch offset. |
2000 | $18.00 ... See Options |
 |
90 Degree 7/8 Header 1-1/2 Inch Offset90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 1-1/2 inch offset. |
2001 | $18.00 ... See Options |
|
90 Degree 7/8 Header 2 Inch Offset90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 2 inch offset. |
2002 | $18.00 ... See Options |
 |
90 Degree 7/8 Header 3 Inch Offset90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 3 inch offset. ... |
2003 | $18.00 ... See Options |
 |
90 Degree Dropped Header- SteelOur new 7/8 dropped header is THE header for Thunderboats! This polished stainless steel header... |
2018 | $20.00 ... See Options |
 |
90 Degree Water FittingBig Bore 90 degree fitting. Great for redirecting water overboard. Works well on gas outriggers. ... |
3643 | $4.50 $3.50Save: 22% off |
 |
90 Degree Water Fitting- M5New 90 degree adjustable water fittings. Use on your Zenoah cylinder head to direct water for use... |
3578 | $11.00 |
 |
90 Degree Water Fitting- M6Fully adjustable 90 degree M6 water fitting. Includes 2 fittings and 2 nuts. |
3619 | $8.00 |
 |
A45 PropCNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. If you like the ABC 1715/2... |
4115 | $21.00 |
 |
ABox Crackerbox KitABox Crackerbox Length: 44 inches ... |
7406 | $99.00 |
 |
ABS Cowling R4 and 21FE V1Stealth cowling for the R4 and JAE 21FE V1 Outrigger. This is the cowling that comes in the... |
2403 | $14.00 |
 |
Accelerator Refill 8 oz8 ounce Refill for our spray accelerator. Foam safe too! See our 2 ounce accelerator spray. ... |
152 | $11.20 |
|
Accelerator Spray Bottle 2 ozMake your CA glue cure instantly with this accelerator. Handy 2 ounce non-aerosol bottle with cap... |
151 | $5.59 |
 |
Adjustable "Z" Strut 12-18New adjustable "Z" strut for 12-18 size outriggers. Includes brass shaft bushing and mounting... |
3494 | $17.00 |
 |
Adjustable "Z" Strut 21-28New adjustable "Z" strut for the R4, 21GT or 33FE outrigger hydroplanes. Will also fit other... |
3495 | $25.00 |
 |
Adjustable "Z" Strut GasAdjustable "Z" strut for outrigger hydroplanes in the gas and big nitro size. Includes brass shaft... |
3496 | $34.00 ... See Options |
 |
Aircraft Wheels 1.50 inchVery light foam wheels weigh 0.2 ounces (6 grams) per pair. Nice molded tread pattern Suitable for... |
402 | $1.75 |
 |
Aircraft Wheels 2.50 inchVery light foam wheels weigh .06 ounces (18 grams) per pair. Nice molded tread pattern Suitable for... |
403 | $2.50 |
 |
Aircraft Wheels 2.75 inchVery light foam wheels weigh 0.8 ounces (24 grams) per pair. Nice molded tread pattern... |
404 | $3.00 |
 |
All In One Strut/Rudder for RG Gas OutriggerNew strut/rudder assembly designed just for the RG Gas Outrigger! Spaces the rudder 2-1/4 inches... |
3775 | $69.00 ... See Options |
 |
Aluminum Boom Tubes 5/8 Inch5/8 inch OD 6061 T6 aluminum boom tubes. Suitable for our Envy gas outrigger. includes 2 tubes ... |
5604 | $30.00 |
 |
Aluminum Exhaust Outlet- PurpleNice machined aluminum exhaust outlet flange At least we think that's what they are 4mm screws... |
xp | $5.00 $2.00Save: 60% off ... See Options |
 |
Amsoil Synthetic 2 Stroke oilAmsoil Saber Professional Synthetic 2 stroke oil. This is the only oil we use and recommend. We... |
3900 | $6.90 |
 |
Antenna Tube with Mount- Choose ColorsAntenna tube with anodized aluminum mount. Tube is about 12 inches long, but can be cut to any... |
3402 | $3.50 $2.00Save: 43% off ... See Options |
 |
Auto BailerAuto Bailer assembly. Mounted low on the transom, these bailers work to get water out of the hull... |
3509 | $6.50 |
 |
Banjo Fitting M5 Steel Banjo fittings with M5 thread. Adjustable 360 degrees. Fits Zenoah ® engines... |
3437 | $8.00 |
 |
BEC Connector SetBEC Connector set. Also known as JST. These are used in small electric applications to... |
605 | $2.00 $1.50Save: 25% off |
 |
Billet Aluminum Oil Cup for T BarBillet aluminum cup to fit our T Bars. Use with cable oil (STP Oil Treatment) Made from clear... |
3566 | $10.00 |
 |
Billet Aluminum T BarBillet aluminum T Bar for 5 inch rails. T Bars are used as a support for the shaft tube at the... |
3565 | $22.00 |
 |
Billet Switch Mount with SwitchCNC machined aluminum switch mount with switch included! This switch mount is machined from 6061... |
3718 | $12.00 $9.00Save: 25% off |
 |
Boat Stand Kit- 30-33 Inch OutriggersBoat stand kit for the R4, 21FE, 33FE, 21OB and 21GT Outriggers. Made from laser cut Birch... |
7701 | $22.00 $18.00Save: 18% off |
 |
Boom Tube Collars 1/4 Inch1/4 inch boom tube collars suitable for our 12G outriggers. Suitable for any rigger with 1/4 inch... |
3479 | $8.00 |
Displaying 100 to 198 (of 528 Products)
Search
Shopping Cart
Your cart is empty.
Specials
ESC Programmer
$12.00 $9.00Save: 25% off
90 Amp Flycolor ESC
$59.00 $42.00Save: 29% off
New Products
90 Degree Water Fitting
$4.50 $3.50Save: 22% off
Large RH Turn Fin Only
$11.00
4818 3 Blade CNC Prop
$20.00