3486
3/16 diameter flexible shaft with a 3/16 stub shaft welded on. Suitable for nitro to .60...
$19.50
Add:
3502
3/16 diameter flexible shaft with a 3/16 stub shaft welded on. Suitable for nitro to .60 and...
$22.50
Add:
3444
1/4 x 27 inch flex shaft. Has 1/4 stub shaft welded on. 1/4-28 threads. Overall length about 27...
$26.00
... See Options Out of Stock
3707
1/4 x 27 inch flex shaft. Has 1/4 stub shaft welded on. Stub shaft is 3-1/2 inches long. 1 inch...
$27.50
... See Options Out of Stock
3765
1/4 x 27 inch flex shaft. Has 1/4 stub shaft welded on. Stub shaft is 4-1/2 inches long. The end...
$26.00
... See Options Out of Stock
3475
. 150 diameter flexible shaft with a 3/16 stub attached. Total length is 17 inches, including the...
$19.00
Add:
3445
¼ x 37 Flex Shaft. Has welded ¼ inch stub shaft. 1/4-28 threads. For use with a...
$37.00
Add:
3443
¼ x 37 Flex Shaft with welded stub shaft turned down to 3/16. 10-32 threads. Use a 3/16...
$37.00
... See Options Out of Stock
3433
1/4 inch round ferrule. Used with square drive shaft assemblies. Solder 1/4 inch cable to one end,...
$6.00
Add:
3624
High quality replacement flex shaft for the OS .21 lower unit Exact fit direct replacement Includes...
$8.00
Add:
3508
Ball thrust bearing set for 1/4 inch shaft. Used in square drive installations. Transfers thrust...
$8.75
Add:
3514
Complete stub shaft set for 1/4 inch shaft. Used in square drive installations. Excellent for use...
$21.50
Add:
3447
Hardened stub shaft for use in square drive systems. Measures about 4-1/2 inches long. Threaded...
$6.00
Add:
3571
Pre-Bent brass shaft tube for the JAE 26FE. Ready to use.
$9.00
Add:
3532
This cable grease has probably been used more than any other cable grease in the world. It is...
$6.50
Add:
3511
Brass shaft tube for boats using 3/16 flex shaft.
$7.00
Add:
3438
Brass shaft tube for boats using 3/16 flex shaft.
$4.00
Add:
3453
Brass stuffing tube for 1/4 shafts. 5/16 shaft tube fits inside. This is the part that gets...
$4.00
Add:
3568
5/16 OD Brass shaft tube for 1/4 shafts. .015 wall thickness. For use without any kind of...
$4.00
Add:
3452
5/16 OD Brass shaft tube for 1/4 shafts. .015 wall thickness. For use without any kind of liner....
$8.00
Add:
3580
Shaft tube clamp with oiler fitting. For use with 11/32 brass tubing. This would be the brass tube...
$6.50
Add:
3565
Billet aluminum T Bar for 5 inch rails. T Bars are used as a support for the shaft tube at the...
$22.00
Add:
3566
Billet aluminum cup to fit our T Bars. Use with cable oil (STP Oil Treatment) Made from clear...
Add:
3758
Large Billet aluminum cup to fit our T Bars. Right side of picture This is a larger cup than our...
$11.00
... See Options Out of Stock
3726
The hardest part about setting up the JAE 33FE Outrigger is bending the shaft tube. Now you can get...
$12.00
Add:
3567
Our 3565 T Bar and 3566 Oil Cup together in a combo. Save $.
$30.00
Add:
3722
Tapered washer set for our 3565 T-Bar. Made from 6061 aluminum. Clear anodized. includes 4 washers.
$3.00
Add:
3572
The hardest part about setting up the JAE 21GT Outrigger is bending the shaft tube. Now you...
$10.00
... See Options
3641
The hardest part about setting up the R4 Outrigger is bending the shaft tube. Now you can get...
$10.00
Add:
3474
Brass shaft tube. 1/4x12 inches. Use with .150 or 3/16 flex shaft.
$3.00
Add:
3482
Aluminum shaft saver for 1/4 inch shafts. Prevents loss of shaft (and prop) if the shaft spins in...
$3.50
Add:
3450
These are the Zuber all metal, integral washer, self locking prop nuts for a 1/4 shaft. Includes...
$2.00
Add:
3615
Bullet prop tail nut for 1/4 inch shafts. Not actually a nut, but has a 1/4 inch hole with a set...
$4.00
Add:
3621
Bullet prop tail nut for 1/4 inch shafts. Threaded 1/4-28. Fits all USA 1/4 inch flex shafts. Hole...
$4.00
Add:
