3479
1/4 inch boom tube collars suitable for our 12G outriggers. Suitable for any rigger with 1/4 inch...
$8.00
Add:
3480
5/16 inch boom tube collars suitable for our 21G2, 21OB and 21FE outriggers. Suitable...
$8.00
Add:
3501
5/8 inch boom tube collars suitable for 5/8 OD boom tubes. Suitable for any rigger with 5/8 inch...
$12.00
Add:
3439
New cowl mounting option for all nitro and small gas cowlings. Using super high strength...
$8.00
Add:
3441
New cowl mounting option for large nitro and gas cowlings. Using super high strength...
$10.00
... See Options Out of Stock
3451
Spring loaded latch to retain hatch. Spring loaded pin is .116 diameter. Body is .213 diameter and...
$3.00
Add:
3582
Spring loaded hatch lock for small boats. Drill a 25/64 (.390) hole. These locks will hold...
$8.00
... See Options Out of Stock
3717
Spring loaded hatch lock for large boats. Drill a 1/4 (.250) hole in the panel and...
$9.00
Add:
3583
Spring loaded hatch lock for large boats. Drill a 15/32 (.468) hole. These locks will hold...
$12.00
Add:
3513
O-ring style cowl hold down set. Attach one standoff to the cowling, and one on the hull. The...
$6.00
Add:
3724
Deluxe O-ring style cowl hold down set. Attach one standoff to the cowling, and one on the hull. ...
$8.00
Add:
3595
Replacement O-rings for our Cowl hold down #3513 only. Clear silicone rubber. Includes 2 O-rings.
$1.80
... See Options Out of Stock
3734
Replacement O-rings for our Cowl hold down #3724 only. Clear silicone rubber. Includes 2 O-rings.
$1.80
Add:
3736
Large bow hook, suitable for all boats. Use as a retrevial hook at the front, or as a towing hook...
$5.50
Add:
3735
Small bow hook, suitable for all boats. Use as a retrevial hook at the front, or as a towing hook...
$4.00
Add:
5602
5/16 inch OD hollow carbon pultruded boom tubes. Suitable for our 21G2 and 21OB outriggers....
$12.50
Add:
5601
1/4 inch OD solid carbon fiber boom tubes. Suitable for our 12G2 and 12G3 outriggers. includes...
$7.00
Add:
7702
Boat stand kit for the 26FE and 12GT Outriggers. Made from laser cut Birch plywood. Includes all...
$19.50 $16.00
Save: 18% off
Add:
5607
5/16 inch OD solid carbon boom tubes. Suitable for our 45 outrigger. includes 2 solid rods .313...
$22.00
Add:
7701
Boat stand kit for the 33FE and 21GT Outriggers. Made from laser cut Birch plywood. Includes all...
$22.00 $18.00
Save: 18% off
Add:
5603
5/16 inch OD SOLID carbon boom rods. Suitable for our 33FE and 21FE outrigger. includes...
$16.00
Add:
3585
New aluminum boom tube sleeves for 5/16 and 8mm boom tubes. These sleeves get glued into the...
$12.00
Add:
3586
New long aluminum boom tube sleeves for 5/16 and 8mm boom tubes. These sleeves get glued into the...
$14.00
Add:
3587
New long aluminum boom tube plugs for 1/2 inch ID boom tubes. These sleeves get glued into the...
$16.00
... See Options Out of Stock
5604
5/8 inch OD 6061 T6 aluminum boom tubes. Suitable for our Envy gas outrigger. includes 2 tubes ...
$30.00
Add:
3453
Brass stuffing tube for 1/4 shafts. 5/16 shaft tube fits inside. This is the part that gets...
$3.00
Add:
3452
5/16 OD Brass shaft tube for 1/4 shafts. .015 wall thickness. For use without any kind of liner....
$7.50
... See Options Out of Stock
3509
Auto Bailer assembly. Mounted low on the transom, these bailers work to get water out of the hull...
$6.00
Add:
3641
The hardest part about setting up the R4 Outrigger is bending the shaft tube. Now you can get...
$10.00
Add:
3474
Brass shaft tube. 1/4x12 inches. Use with .150 or 3/16 flex shaft.
$2.50
Add:
