5003
NEW! High quality servo. Ball bearings and 90 inch ounces of torque! This is a standard sized...
$16.00 $12.00
Save: 25% off
... See Options Out of Stock
3428
Aluminum servo mount for side mounting. Fits Hitec HS225, HS225MG and others of that size. Clear...
$10.00
Add:
3430
Aluminum servo mount for side mounting. Fits standard size servos. Clear anodized aluminum. ...
$10.00 $7.50
Save: 25% off
Add:
3711
One piece servo mount for standard servos. Fits servos that are about 1.6 x .08 inch (41x20 mm). ...
$7.50
Add:
3715
Dual Servo mount for two standard size servos in tandem. Bolt to floor or side. CNC...
$8.00
Add:
3429
Aluminum servo mount for side mounting. Fits giant or quarter scale size servos. Clear anodized...
$10.00
Add:
3737
Servo wire retainer. Used to keep servo extensions from coming apart. Made from clear nylon....
$1.00
Add:
3630
6 inch (15cm) servo extension Fits all modern servos and speed controls 26 ga wire Includes...
$1.50
Add:
3631
12 inch (30cm) servo extension Fits all Futaba servos and speed controls 26 ga wire Includes...
$1.50
Add:
3632
24 inch (60cm) servo extension Fits all servos and speed controls 26 ga wire Includes...
$2.00
Add:
3635
"Y" harness servo extension Fits all servos and speed controls 26 ga wire...
$2.00
Add:
3770
Lightweight Carbon Pushrod Set Length can be from 6 to 34 inches total Fully adjustable Great for...
$14.00
... See Options
3771
Lightweight Carbon Pushrod Set with two pushrods Length can be from 6 to 34 inches total Fully...
$24.00
... See Options
3527
Heavy duty servo arm set for Futaba and Tower Hobbies servos. Includes 2 each: 3/4 inch ...
$7.50
Add:
3528
Heavy duty servo arm set for Hitec servos. Includes 2 each: 3/4 inch 1 inch 1-1/4...
$7.50
Add:
3529
Heavy duty servo arm set for JR servos. Includes 2 each: 3/4 inch 1 inch 1-1/4 inch 2 inch...
$7.50
Add:
3516
Rubber Pushrod Seals Suitable for 2-56 or 4-40 pushrods. Made from black rubber. Thick rubber...
$3.00
Add:
3404
Rubber Pushrod Seals Suitable for 2-56 or 4-40 pushrods. Made from black rubber. Package of two. ...
$3.00
Add:
3702
These are the smaller version or our popular "Pro Style" pushrod seals. Great for small...
$4.00
Add:
3422
New Version 2! Maximum panel thickness is now a full 1/4 inch (6.4mm)! These are the latest...
$7.00
Add:
3107
Standard receiver switch for all modern radios. 2 wire (does not have charge plug). Both ends...
$3.50
Add:
3108
Standard receiver switch for all modern radios. 3 wire (includes charge plug). Wires are all...
$4.00
Add:
3468
Dubro Kwik Switch Mount. Provides a waterproof mount for your receiver switch. Includes all...
$5.00
Add:
3718
CNC machined aluminum switch mount with switch included! This switch mount is machined from 6061...
$12.00 $9.00
Save: 25% off
Add:
3563
This is expensive radio box tape. It is also the best you can buy. This is what you use to tape...
$24.50 $19.50
Save: 20% off
Add:
3638
Dubro threaded clevis for 2-56 sized pushrod. Screws onto threaded pushrod. Black oxide steel....
$1.80
Add:
3705
Dubro solder clevis for 2-56 sized pushrod. Solder to unthreaded pushrod. Plated steel. Includes...
$1.80
Add:
3716
4-40 threaded clevice. Fits 4-40 rod Includes 2 clevices and 2 keepers
$3.00
Add:
3455
Dubro solder clevis for 4-40 sized pushrod. Solder to unthreaded pushrod. Plated steel. Includes...
$2.60
Add:
3573
Sullivan aluminum ball connector w/sleeve. Use as a pushrod end where you need some angular...
$6.00
Add:
3574
Aluminum ball connector w/sleeve. Use as a pushrod end where you need some angular movement. This...
$5.00
Add:
3420
Heavy duty ball link for 2-56 pushrods. Use this to connect to your throttle on larger boats. Use...
$2.00
Add:
3457
Heavy duty ball link for 4-40 pushrods. Use this to connect to your rudder on larger boats. ...
$3.00
Add:
3402
Antenna tube with anodized aluminum mount. Tube is about 12 inches long, but can be cut to any...
$3.50
... See Options
3458
DuBro EZ connector for 2-56 size pushrods. Excellent for throttle pushrod on any boat, and rudder...
$1.80
Add:
3459
DuBro nylon clevis for 2-56 pushrods. Great clevis for the other end of a 2-56 pushrod when used...
$1.50
Add:
3462
12 inch steel pushrod threaded 2-56 at one end. Use for throttle pushrod on all boats and rudder...
$2.28
Add:
3463
12 inch steel pushrod threaded 4-40 at one end. Use for rudder pushrod on all boats above .45...
$3.00
Add:
3105
Battery holder for 4 AA size batteries. We use these in all of our gas boats. AA Alkaline...
$4.00
Add:
3106
Battery holder for 4 AA size batteries. We use these in all of our gas boats. AA Alkaline...
$4.00
Add:
3103
Fiberglass radio box for large nitro and gas applications. Designed for use between 5 inch rail...
$16.00
Add:
3104
Lexan radio box for large nitro and gas applications. Designed for use between 5 inch rail...
$20.00
Add:
3476
Replacement silicone seal for our 3104 Lexan Radio Box Includes one silicone seal
$4.50
Add:
3102
Replacement radio box lid for our 3104 Lexan radio box. Made from clear 1/8 inch High Impact...
$8.00
Add:
3703
Thumb screws to replace missing screws on our 3104 radio box. These purple anodized aluminum...
$9.50
Add:
3706
DuBro 30 inch steel pushrod. Threaded 2-56 at one end. Includes 1 pushrod.
$2.00
Add:
3456
DuBro 36 inch flex pushrod. Excellent for outboard throttle connections. Includes braided steel...
$7.00
Add:
3551
These are the ultimate servo screws! These purpose designed servo screws feature a captive washer...
$2.00
Add:
3552
These are the ultimate servo screws! These purpose designed servo screws feature a captive washer...
$2.00
Add:
