3465
1/8 to .130 flex collet. Fits 1/8 inch (3.2mm) smooth shaft and connects to a .130 flex cable. ...
$8.00
Add:
3628
Adapter set for OS This kit allows you to bolt on an electric motor to an OS lower unit with no...
$35.00
Add:
3470
Basic hardware set for our JAE 12GT and 26FE kits. Save $5.75 by buying together! Includes: 3...
$53.00
... See Options
3629
Adapter set for K&B This kit allows you to bolt on an electric motor to a K&B 3.5 lower...
$35.00
Add:
3471
Basic hardware set for our JAE 21G2 and 21FE V2 kits. Includes: 3-3/4 inch rudder (3483) Z21...
$40.00
... See Options Out of Stock
3492
Collet fits 5mm smooth motor shaft. Clamps to .150 flex shaft. ID is .150 (not 4mm) to...
$8.00
Add:
3627
Square drive coupler for 3.5 lower units. Fits all electric motors with 5mm shafts. Includes...
$7.50
Add:
3475
. 150 diameter flexible shaft with a 3/16 stub shaft welded on. Total length is 17 inches,...
$18.00
Add:
3512
Collet fits 5mm motor shaft. Clamps to .187 flex shaft. Stainless steel
$9.00
Add:
3727
Velcro wrap for batteries and electronics. Double sided, so it sticks to itself. 3/4 by 12 inches....
$2.00
Add:
3535
New Fast Electric Collet Collet fits 8mm electric motor shaft. Clamps to .187 (3/16) flex...
$12.00
Add:
3561
New Fast Electric version of our famous Super Collet! Collet fits 8mm electric motor shaft. ...
$12.00
... See Options
3515
Angle is adjustable to allow straight alignment with propeller shaft. The anodized aluminum...
$10.00
Add:
3704
HD motor coupler for light duty brushed motors. Allows substantial mis-alignment of motor to...
$7.50
Add:
3571
Pre-Bent brass shaft tube for the JAE 26FE. Ready to use.
$8.00
Add:
3726
The hardest part about setting up the JAE 33FE Outrigger is bending the shaft tube. Now you can get...
$10.00
Add:
3474
Brass shaft tube. 1/4x12 inches. Use with .150 or 3/16 flex shaft.
$2.50
Add:
3405
Standard water outlet for meduim to large (3/32 and 1/8) tubing. Gives a nice finished appearance...
$2.50
Add:
640
29mm x 50mm cooling ring Suitable for 29mm Inrunner Motors Measures 29mm ID and 50mm long...
$8.50
... See Options Out of Stock
642
29mm x 50mm cooling ring Suitable for 29mm Inrunner Motors Measures 29mm ID and 50mm long ...
$9.00
Add:
641
29mm x 50mm cooling ring Suitable for 29mm Inrunner Motors Measures 29mm ID and 50mm long ...
$10.00
... See Options
708
Aluminum cooling jacket for 36mm motors. Fits 3650, 3656 and 3660 motors. Length is 45mm. Machined...
$12.00 $9.00
Save: 25% off
... See Options Out of Stock
711
Aluminum cooling jacket for 40mm motors. Fits 4082 motors. Length is 55mm. Machined from...
$12.00
... See Options
710
Aluminum cooling jacket for 40mm motors. Fits 4092 and 40104 motors. Length is 70mm. Machined...
$12.00
... See Options
3625
1/8 inch ID silicone water or fuel line for nitro and fast electric boats. 16 foot roll. ...
$10.50
Add:
3625
1/8 inch ID silicone water or fuel line for nitro and fast electric boats. 16 foot roll. ...
$10.50
Add:
707
New XT 150 connectors Heavy Duty original nylon connectors with 6mm Gold plated bullets. Capable...
$4.00
Add:
3639
Custom Motor Collet to fit 1/8 inch (3.17mm) motor shaft Fits .150 US flex cable (3.7mm), not 4mm...
$8.00
Add:
621
EC-5 Connector set. Use on Fast Electric boats or high amp aircraft. Suitable for 125+ amps...
$4.50
Add:
3418
Water cooling unit for small electronic speed controllers. Measures 1-3/16x.9 inches. Use heat...
$6.00
Add:
602
Plug set for fast electric. These are the "T" plugs. Similar to the Deans Ultra Plug....
$1.50
Add:
604
3.5mm Bullet Plug set for fast electric motors. These are 3.5 millimeter plugs used on...
$2.00
... See Options
605
BEC Connector set. Also known as JST. These are used in small electric applications to...
$1.75
Add:
