All Products

Aluminum cooling jacket for 40mm motors. Fits 4092 and 40104 motors. Length is 70mm. ...

4214/3 CNC Machined 7075-T6 aluminum prop Great prop on 4S mono, cat and hydro Excellent heat...

5 axis CNC machined aluminum prop. 42mm (1.65 in.) Diameter 67.2mm (2.64 in.) Pitch Good for .21...

5 axis CNC machined aluminum 3 blade prop. 42mm (1.65 in.) Diameter 75mm (2.97 in.) Pitch Big prop...

5 axis CNC machined aluminum prop. 42mm (1.65 in.) Diameter 77mm (3.14 in.) Pitch 4S to 6S...

Copper 437 3 blade prop. Ready to use out of the package. You can sharpen it a little more than...

Copper 438 3 blade prop. Ready to use out of the package. You can sharpen it a little more than it...

CNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. 44mm Diameter 62mm...

44mm diameter (1.73 inches) 62mm pitch (2.44 inches). Suitable for nitro boats from .18 to .28 and...

These billet T-6 aluminum mounts fit our JAE 45 Twin Outrigger. They feature HD rubber grommet...

Water pickup rudder for .45 to .90 boats. New straight rudder (no taper). LE of rudder is 2-1/4...

CNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. 45mm Diameter 63mm...

5 axis CNC machined aluminum prop. 45mm (1.77 in.) Diameter 81mm (3.18 in.) Pitch Big prop, lots of...

5 axis CNC machined aluminum prop. 45mm (1.77 in.) Diameter 85mm (3.36 in.) Pitch Good for 4S hydro...

Cosmetic damage in gel coat. Wash cowling with Dawn to remove all mold release. Fill damaged...

7075 Aluminum 46mm 3 blade prop. Ready to use out of the package. Perfectly sharp and...

472/3 Copper Alloy Prop. Good for large gas mono hulls. 72mm Diameter (2.83 inches) with 101mm...

7075 Aluminum 48mm 2 blade prop. Ready to use out of the package. Sharp and balanced. 48mm...

4S power set for 29-36 inch boats Perfect for converting 21 sized nitro boats to modern electric...

5 minute epoxy in two bottles total 4.5 ounces. Mix 1 to 1 Working time- 3 minutes Cure- 10...

5/16 OD Brass shaft tube for 1/4 shafts.  .015 wall thickness. For use without any kind of...

7075 Aluminum 50mm 3 blade prop. Ready to use out of the package. Perfectly sharp and...

7075 Aluminum 52mm 2 blade prop. Ready to use out of the package. Perfectly sharp and...

7075 Aluminum 55mm 2 blade prop. Ready to use out of the package. Perfectly sharp and...

Cast aluminum 570 2 blade prop. Great prop for stock or mod gas mono hulls. Diameter 2.75 inches...

Collet fits 5mm motor shaft. Clamps to .187 flex shaft. Stainless steel

6 inch (15cm) servo extension  Fits all modern servos and speed controls 26 ga wire Includes...

New Super Prop! Now polished! New Hard Copper alloy construction. Amazing performance on Gas...

67mm diameter (2.63 inches) 114mm pitch (4.49 inches) Suitable for gas boats and large electric. ...

New 6V 4.5A Sealed Lead Acid Battery. Use 2 of these in parallel for your Tugster Tug Boat. Can...

78mm diameter (3.07 inches) 109mm pitch (4.29 inches) Suitable for gas boats and large electric. ...

Sullivan 8 ounce Flex fuel tank for nitro fuel only. Includes tank, stopper, cap, screw, brass...

New Fast Electric version of our famous Super Collet! Collet fits 8mm electric motor shaft. ...

90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 1 inch offset.

90 degree header for 7/8 exhaust systems. Thick wall stainless steel. Has 2 inch offset.

Our new 7/8 dropped header is THE header for Thunderboats! This polished stainless steel header...

New 90 degree adjustable water fittings. Use on your Zenoah cylinder head to direct water for use...

CNC 5 Axis machined prop. Made from strong 7075 Billet Aluminum. If you like the ABC 1715/2...

Stealth cowling for the R4 and JAE 21FE V1 Outrigger. This is the cowling that comes in the...

Make your CA glue cure instantly with this accelerator. Handy 2 ounce non-aerosol bottle with cap...

New adjustable "Z" strut for the R4, 21GT or 33FE outrigger hydroplanes. Will also fit other...

New strut/rudder assembly designed just for the RG Gas Outrigger! Spaces the rudder 2-1/4 inches...

Amsoil Saber Professional Synthetic 2 stroke oil. This is the only oil we use and recommend. We...

Auto Bailer assembly. Mounted low on the transom, these bailers work to get water out of the hull...

BEC Connector set. Also known as JST. These are used in small electric applications to...

Billet aluminum T Bar for 5 inch rails. T Bars are used as a support for the shaft tube at the...

Replacement blades for the Master Airscrew Hand Planer   Includes 3 Planer Blades  ...

10mm inch boom tube collars suitable for our R6 and 67/84 outriggers. Suitable for any rigger...

5/8 inch boom tube collars suitable for 5/8 OD boom tubes. Suitable for any rigger with 5/8 inch...

Large bow hook, suitable for all boats. Use as a retrevial hook at the front, or as a towing hook...